Gu an Jianneng Trading Co., Ltd
Gu an Jianneng Trading Co., LTD High-quality & competitive price to survival , Integrity service for development.
Add to Cart
Socket And Spigot Joints Type Scaffolding Stair Access Towers For Chimneys Water Towers
Brief Introduction :
The main components of safety climbing scaffold are vertical bar, cross bar and inclined bar.
Each interval of 50CM or 75CM or 100CM on the vertical bar is provided with a row of pin stock, which is made of high-strength steel plate stamping and welded on the steel pipe through special clamps. The welding line length is large and the stability is extremely high. The two ends of the cross bar are respectively set with the corresponding buckle and pin base plug. The range of contact between the cross bar plug and the vertical bar steel pipe is large, with two-way locking function. Each pin base node can be equipped with 4 cross bar joints at the same time.
The reasonable pin base joint structure and vertical bar axial force make the overall structure of the scaffold have high strength in 3d space, good overall stability and reliable self-locking function, which can effectively improve the stable strength and safety of the whole scaffold of the scaffold and better meet the needs of construction safety.
Application:
The Socket And Spigot Joints Type Scaffolding Stair Access Towers is widely used in construction of houses, Bridges, overpasses, tunnels, culverts, chimneys, water towers, DAMS and large-span scaffolds.
Technical Parameter:
| Material | Q235 |
| Thickness of vertical tube (mm) | 3.25 |
| Thickness of horizontal tube (mm) | 2.2 |
| Thickness of oblique tube (mm) | 1.5 |
| Height each piece | 3 |
| Length each piece | 2.5 |
| Width each piece | 1.2 |
| Weight of each piece (KG) | 75 |
Features of Socket And Spigot Joints Scaffolding Stair Access Towers:
1. Multiple functions: according to specific construction requirements, construction equipment with multiple functions can be composed of single-row, double-row scaffolds, support racks, support columns and material lifting racks of various sizes and loads.
2. Strong bearing capacity: the stamping pin has reliable axial shear strength, large contact surface between horizontal bar and vertical bar, and strong overall stability.
3. Safe and reliable: independent bolt interpenetration and self-locking structure is adopted.
4. Easy installation: when installing, just point the banana head of the cross bar to the position of the pin store, and then put the pin into the pin store by hand, and then hit the top of the bolt with the hand hammer, so that the cross bar plug is closely connected with the vertical bar.
5. Good comprehensive benefits: standardized component series, easy to transport and manage, free of loose components, low loss and less investment in the later stage.
Note: the vertical bar is provided with a node every 75CM, and each vertical bar node is provided with a protective cross bar;Each layer is equipped with corresponding protective inclined bar;Each staircase is equipped with internal handrails;Safer and more secure.
